Computer Servo Double Column Tensile Tester
This equipment is mainly used in all kinds of hardware, metal, rubber plastic, footwear, leather, clothing, textile, insulator, cable, terminal and other materials, testing as per customer requirement such as tensile test, peel test, tear test, compression test, bend test with different clamps, elongation and other physical properties test performance.
Metal Wire Torsion Tester
The tester is suitable for measuring the plastic deformation capacity of metal wire with diameter (feature size) of 0.1-6.0mm in one-way or two-way torsion and displaying the defects on the surface and inside of the wires.
Coil Spring Tester
This equipment is suitable for testing the fatigue life of various coil springs, disk springs, shock absorbers, pocket springs, etc. The up and down amplitude and the frequency of the tester can be adjusted according to the spring material. Coil Spring Tester is widely used in the production and application of springs and shock absorbers.
The Mattress Durability Tester (Three in one device)
This equipment is mainly used to assess the durability of the edge and mattress pavement of all kinds of mattresses regardless of the materials of construction, by simulating long-term use conditions. At the same time, the deflection measurement, mattress height, edge height, and the hardness of the mattress are measured. This tester can automatically provide a graphical representation of measured values, test evaluation, and logging.
Foam Flame Retardance Tester (vertical flame test)
This equipment is suitable for flammability test of filling and ductile materials such as mattress, sofa and upholstered furniture. Install the sample in the sample holder vertically hanging in this test instrument. Burn the below of sample with a flame of required height within a certain period of time to observe its damage degree, which is used to assess the performance of sample resisting burning, smoldering and scorching.
Martindale abrasion tester(4 positions)
This equipment is mainly used to test the abrasion resistance of fabrics, similar substance of fabrics and the outer layer, lining, substrate of footwear. Using the standard friction cloth surface to accept the friction of the test instrument, which can be divided into wet state test or dry state test. Through the friction of Lissajous direction property, under a certain number of times, the differences between the tested fabric and the original fabric can be observed and compared , so as to judge the fabric wear resistance level.
Color Fastness Tester of Fabric Dyeing (white)
It is used to determine the color fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and high repeatability of test. Fitted with a pre-determined electronic counter for strokes up to 9999.