What should I pay attention to in daily use of full automatic packaging machine?





 With the continuous improvement of people's living standards, people's demand for various convenience foods has also greatly increased, which has promoted the rapid development of my country's food packaging industry. As the main machinery of packaging equipment, the full automatic packaging machine is used in many fields. What should be paid attention to in the daily use of the full automatic packaging machine that has just been bought?

   1. The full automatic packaging machine should be used in an environment where the temperature is minus 10℃~50℃, the relative humidity is not more than 85%, and there is no corrosive gas, dust and explosion hazard in the surrounding air.

   2. In order to ensure the normal operation of the vacuum pump, the vacuum pump motor is not allowed to reverse. The position of the three-dimensional transparent film packaging machine for camellia should be checked frequently. The normal oil level should be 1/2-3/4 of the oil window, and the vacuum should not be exceeded. When there is water or oil in the pump, the oil should be replaced at this time. Under normal circumstances, the pump should be continuously working Replace it once or twice a month. You can also use 1g vacuum gasoline or 30g gasoline and engine oil.

   Third, the impurity filter should be disassembled and cleaned frequently﴿ generally cleaned once every 1-2 months. For example, if there are packages, the cleaning time should be shortened.

   Four. After continuous operation for 2 to 3 months, the back cover should be opened, 30 pairs of sliding parts and switch buffers should be lubricated, and the connecting movable parts on the heating rod should be lubricated according to the usage.

   5. Frequently check the decompression, filtration and oil mist triple pieces 24 to ensure that there is oil in the oil mist and the oil cup, and there is no water in the sewing machine oil and the filter cup.

   Six. The heating strip and the silicone strip should be kept clean, and no foreign matter should be stuck, so as not to affect the sealing quality.

   Seven, the two layers of paste on the heating rod and under the heating plate play an insulating role. When damaged, it should be replaced in time to avoid short circuit.

   8. The working pressure of the full automatic packaging machine is set to 0.3MPa, which is more appropriate. No special circumstances, don't adjust too much.

   Nine, the full automatic packaging machine is not allowed to tilt and impact during the transportation, let alone put it down for transportation.

  10. A reliable grounding device must be installed when the full automatic packaging machine is installed.

  11. Do not put your hands under the heating rod to avoid injury. In case of emergency, cut off the power immediately.

  12. When working, ventilate first and then power on. When shutting down, cut off the power first, and then cut off the gas.

Recommend Read